Network Settings - 802.1X etc
To access the 802.1X menu click on the amp info button:
Then click on the 802.1X button:
PEAP mode requires an identity and password at a minimum to successfully connect. Anonymous Identity and Domain are optional fields. Once settings are entered you will have to click on the save button in the top right corner of the amp, just like the network settings window.
- How do we set the subnet mask for the wired ethernet adapter? (The audio vlans will not be class C.)
A: Subnet mask can be set using the CIDR Notation method in the static IP address field with the IP address followed by a / and the number of bits in the subnet mask
Example: 192.168.1.100/16 = ip of 192.168.1.100 and a subnet mask in dot decimal of 255.255.0.0
THIS is a link to the Wikipedia explanation with a table of corresponding dot decimal subnet mask values.
- Could you please confirm which field updates the network host name.
A: Network host name should be the same as the domain name
This isn’t required to fill in but can help speed up the connection process if there are multiple domains on the network
If blank it will check all domains on the network until it finds the correct one
- Is there anywhere to set NTP?
A: There is currently no way to configure the NTP settings on the amplifier. The amps are configured to utilize NTP if it is present on the network so it will utilize that time received on the amp.