Soundcraft - Ui Full Reset
Note: This method removes all updates you may have performed on the mixer and returns the unit to its default factory shipping firmware and state. All settings, snapshots, users, profiles and shows will be lost.
Please ensure you have saved/backed up any shows before resetting your Ui.
1. Create a blank text file on a computer, name it fullreset.txt (no contents necessary) and copy to a USB stick
Note: Keep in mind that the text document is called "fullreset" and the ".txt" is the file format.
2. Insert the USB stick into one of the Ui’s USB ports.
3. Use a slim, long object to hold the reset button down. Switch the Ui on and continue to hold it down until the WiFi light turns to a solid blue (not flashing).
4. The Ui will recognise the fullreset.txt file on the USB stick and perform a full factory reset.
5. Power cycle the unit and reconnect the client device (power off for at least 10-15 seconds before powering back on).
Note: A flick of the power off/on will almost always fail to boot properly, and can get stuck (with continuous flashing blue Wi-Fi LED). Make sure to power off, wait 10-15 seconds, then power on. The blue Wi-Fi LED will pulse/flash for around 10-15 seconds then remain on.
6. Factory reset complete. After checking, it will reset to the original firmware so you'll need to update it again.