Anthem MRX Wi-Fi Setup

Below is a setup guide for an Anthem MRX on both Android and iOS.

Wireless Network Setup

NOTE: When using a wireless connection (WiFi or Bluetooth), both antennae’s must be connected to the unit.

iOS Wi-Fi Connection: Ensure your Apple device is connected to the wireless network you wish to connect the Receiver/

Processor to.

1. Enter the Wi-Fi Settings Menu.

2. Locate MRX/AVM under “Set up new AirPlay speaker.”

3. Select the unit you wish to connect and allow it to connect to your network.

NOTE: The Receiver/Processor will appear as MRX/AVM in the AirPlay speaker menu.

Android Wi-Fi Connection: Download and open the Google Home application. You should be prompted that there is a

device available for setup. If not, tap “x” followed by “Setup a Device”. Select the MRX/AVM and follow the instructions on

screen. To listen to cast audio from any supported application on your MRX/AVM, ensure your device is connected to the

same network as the MRX/AVM. Tap the Chromecast built-in icon from within the application and select the MRX/AVM as the

playback device.

NOTE: If you connect to your network before connecting speakers, you will not hear the connection chime.